이것은 제자리에서 변환을 수행하며 모든 필터 분기와 마찬가지로 제거 할 수 있습니다 ( git fetch . +refs/original/*:*).

utils다른 프로젝트에서 유용하기 시작한 라이브러리 가있는 프로젝트가 있으며 그 역사를 하위 모듈로 나누고 싶었습니다. 처음에는 그렇게 생각하지 않았기 때문에 내가 직접 작성 했으므로 로컬로 기록을 작성하므로 조금 더 빠릅니다. 원하는 경우 도우미 명령의 .gitmodules파일 등을 설정하고 하위 모듈 기록을 어디서나 푸시 할 수 있습니다 당신이 원합니다.

제거 된 명령 자체는 여기에 있으며, 주석에있는 문서는 다음에 나오는 제거되지 않은 명령에 있습니다. 디렉토리를 분할하는 subdir것처럼 세트 를 사용하여 자체 명령으로 실행하십시오 . 일회성이기 때문에 해키이지만 Git 히스토리의 Documentation 하위 디렉토리에서 테스트했습니다.subdir=utils git split-submoduleutils

#!/bin/bash
# put this or the commented version below in e.g. ~/bin/git-split-submodule
${GIT_COMMIT-exec git filter-branch --index-filter "subdir=$subdir; ${debug+debug=$debug;} $(sed 1,/SNIP/d "$0")" "$@"}
${debug+set -x}
fam=(`git rev-list --no-walk --parents $GIT_COMMIT`)
pathcheck=(`printf "%s:$subdir\\n" ${fam[@]} \
    | git cat-file --batch-check='%(objectname)' | uniq`)
[[ $pathcheck = *:* ]] || {
    subfam=($( set -- ${fam[@]}; shift;
        for par; do tpar=`map $par`; [[ $tpar != $par ]] &&
            git rev-parse -q --verify $tpar:"$subdir"
        done
    ))
    git rm -rq --cached --ignore-unmatch  "$subdir"
    if (( ${#pathcheck[@]} == 1 && ${#fam[@]} > 1 && ${#subfam[@]} > 0)); then
        git update-index --add --cacheinfo 160000,$subfam,"$subdir"
    else
        subnew=`git cat-file -p $GIT_COMMIT | sed 1,/^$/d \
            | git commit-tree $GIT_COMMIT:"$subdir" $(
                ${subfam:+printf ' -p %s' ${subfam[@]}}) 2>&-
            ` &&
        git update-index --add --cacheinfo 160000,$subnew,"$subdir"
    fi
}
${debug+set +x}

#!/bin/bash
# Git filter-branch to split a subdirectory into a submodule history.

# In each commit, the subdirectory tree is replaced in the index with an
# appropriate submodule commit.
# * If the subdirectory tree has changed from any parent, or there are
#   no parents, a new submodule commit is made for the subdirectory (with
#   the current commit's message, which should presumably say something
#   about the change). The new submodule commit's parents are the
#   submodule commits in any rewrites of the current commit's parents.
# * Otherwise, the submodule commit is copied from a parent.

# Since the new history includes references to the new submodule
# history, the new submodule history isn't dangling, it's incorporated.
# Branches for any part of it can be made casually and pushed into any
# other repo as desired, so hooking up the `git submodule` helper
# command's conveniences is easy, e.g.
#     subdir=utils git split-submodule master
#     git branch utils $(git rev-parse master:utils)
#     git clone -sb utils . ../utilsrepo
# and you can then submodule add from there in other repos, but really,
# for small utility libraries and such, just fetching the submodule
# histories into your own repo is easiest. Setup on cloning a
# project using "incorporated" submodules like this is:
#   setup:  utils/.git
#
#   utils/.git:
#       @if _=`git rev-parse -q --verify utils`; then \
#           git config submodule.utils.active true \
#           && git config submodule.utils.url "`pwd -P`" \
#           && git clone -s . utils -nb utils \
#           && git submodule absorbgitdirs utils \
#           && git -C utils checkout $$(git rev-parse :utils); \
#       fi
# with `git config -f .gitmodules submodule.utils.path utils` and
# `git config -f .gitmodules submodule.utils.url ./`; cloners don't
# have to do anything but `make setup`, and `setup` should be a prereq
# on most things anyway.

# You can test that a commit and its rewrite put the same tree in the
# same place with this function:
# testit ()
# {
#     tree=($(git rev-parse `git rev-parse $1`: refs/original/refs/heads/$1));
#     echo $tree `test $tree != ${tree[1]} && echo ${tree[1]}`
# }
# so e.g. `testit make~95^2:t` will print the `t` tree there and if
# the `t` tree at ~95^2 from the original differs it'll print that too.

# To run it, say `subdir=path/to/it git split-submodule` with whatever
# filter-branch args you want.

# $GIT_COMMIT is set if we're already in filter-branch, if not, get there:
${GIT_COMMIT-exec git filter-branch --index-filter "subdir=$subdir; ${debug+debug=$debug;} $(sed 1,/SNIP/d "$0")" "$@"}

${debug+set -x}
fam=(`git rev-list --no-walk --parents $GIT_COMMIT`)
pathcheck=(`printf "%s:$subdir\\n" ${fam[@]} \
    | git cat-file --batch-check='%(objectname)' | uniq`)

[[ $pathcheck = *:* ]] || {
    subfam=($( set -- ${fam[@]}; shift;
        for par; do tpar=`map $par`; [[ $tpar != $par ]] &&
            git rev-parse -q --verify $tpar:"$subdir"
        done
    ))

    git rm -rq --cached --ignore-unmatch  "$subdir"
    if (( ${#pathcheck[@]} == 1 && ${#fam[@]} > 1 && ${#subfam[@]} > 0)); then
        # one id same for all entries, copy mapped mom's submod commit
        git update-index --add --cacheinfo 160000,$subfam,"$subdir"
    else
        # no mapped parents or something changed somewhere, make new
        # submod commit for current subdir content.  The new submod
        # commit has all mapped parents' submodule commits as parents:
        subnew=`git cat-file -p $GIT_COMMIT | sed 1,/^$/d \
            | git commit-tree $GIT_COMMIT:"$subdir" $(
                ${subfam:+printf ' -p %s' ${subfam[@]}}) 2>&-
            ` &&
        git update-index --add --cacheinfo 160000,$subnew,"$subdir"
    fi
}
${debug+set +x}

답변