디렉토리는 다음과 같습니다.
home/
file1.html
file2.html
Another_Dir/
file8.html
Sub_Dir/
file19.html
PHPMyAdmin http://trac.seagullproject.org/browser/branches/0.6-bugfix/lib/other/Zip.php 에서 사용되는 것과 동일한 PHP Zip 클래스를 사용하고 있습니다. 파일이 아닌 디렉토리를 압축하는 방법을 잘 모르겠습니다. 지금까지 내가 가진 내용은 다음과 같습니다.
$aFiles = $this->da->getDirTree($target);
/* $aFiles is something like, path => filetime
Array
(
[home] =>
[home/file1.html] => 1251280379
[home/file2.html] => 1251280377
etc...
)
*/
$zip = & new Zip();
foreach( $aFiles as $fileLocation => $time ){
$file = $target . "/" . $fileLocation;
if ( is_file($file) ){
$buffer = file_get_contents($file);
$zip->addFile($buffer, $fileLocation);
}
}
THEN_SOME_PHP_CLASS::toDownloadData($zip); // this bit works ok
하지만 다운로드 한 해당 zip 파일의 압축을 풀려고하면 “작업이 허용되지 않음”이 표시됩니다.
이 오류는 Mac에서 압축을 풀려고 할 때만 발생하며 명령 줄을 통해 압축을 풀면 파일이 정상적으로 압축 해제됩니다. 다운로드시 특정 콘텐츠 유형 (현재 ‘application / zip’)을 보내야합니까?
답변
다음은 모든 파일 또는 디렉토리를 재귀 적으로 압축 할 수있는 간단한 함수입니다. zip 확장자 만로드하면됩니다.
function Zip($source, $destination)
{
if (!extension_loaded('zip') || !file_exists($source)) {
return false;
}
$zip = new ZipArchive();
if (!$zip->open($destination, ZIPARCHIVE::CREATE)) {
return false;
}
$source = str_replace('\\', '/', realpath($source));
if (is_dir($source) === true)
{
$files = new RecursiveIteratorIterator(new RecursiveDirectoryIterator($source), RecursiveIteratorIterator::SELF_FIRST);
foreach ($files as $file)
{
$file = str_replace('\\', '/', $file);
// Ignore "." and ".." folders
if( in_array(substr($file, strrpos($file, '/')+1), array('.', '..')) )
continue;
$file = realpath($file);
if (is_dir($file) === true)
{
$zip->addEmptyDir(str_replace($source . '/', '', $file . '/'));
}
else if (is_file($file) === true)
{
$zip->addFromString(str_replace($source . '/', '', $file), file_get_contents($file));
}
}
}
else if (is_file($source) === true)
{
$zip->addFromString(basename($source), file_get_contents($source));
}
return $zip->close();
}
다음과 같이 호출하십시오.
Zip('/folder/to/compress/', './compressed.zip');
답변
또 다른 재귀 디렉토리 트리 아카이브는 ZipArchive의 확장으로 구현됩니다. 보너스로 단일 문 트리 압축 도우미 기능이 포함되어 있습니다. 다른 ZipArchive 함수에서와 같이 선택적 localname이 지원됩니다. 추가 할 오류 처리 코드 …
class ExtendedZip extends ZipArchive {
// Member function to add a whole file system subtree to the archive
public function addTree($dirname, $localname = '') {
if ($localname)
$this->addEmptyDir($localname);
$this->_addTree($dirname, $localname);
}
// Internal function, to recurse
protected function _addTree($dirname, $localname) {
$dir = opendir($dirname);
while ($filename = readdir($dir)) {
// Discard . and ..
if ($filename == '.' || $filename == '..')
continue;
// Proceed according to type
$path = $dirname . '/' . $filename;
$localpath = $localname ? ($localname . '/' . $filename) : $filename;
if (is_dir($path)) {
// Directory: add & recurse
$this->addEmptyDir($localpath);
$this->_addTree($path, $localpath);
}
else if (is_file($path)) {
// File: just add
$this->addFile($path, $localpath);
}
}
closedir($dir);
}
// Helper function
public static function zipTree($dirname, $zipFilename, $flags = 0, $localname = '') {
$zip = new self();
$zip->open($zipFilename, $flags);
$zip->addTree($dirname, $localname);
$zip->close();
}
}
// Example
ExtendedZip::zipTree('/foo/bar', '/tmp/archive.zip', ZipArchive::CREATE);
답변
세 번째 인수를 취하도록 Alix Axel 의 답변을 편집했습니다. 이 세 번째 인수를 true
모든 파일에 설정하면 zip 폴더가 아닌 기본 디렉토리 아래에 추가됩니다.
zip 파일이 존재하면 파일도 삭제됩니다.
예:
Zip('/path/to/maindirectory','/path/to/compressed.zip',true);
세 번째 인수 true
zip 구조 :
maindirectory
--- file 1
--- file 2
--- subdirectory 1
------ file 3
------ file 4
--- subdirectory 2
------ file 5
------ file 6
세 번째 인수 false
또는 누락 된 zip 구조 :
file 1
file 2
subdirectory 1
--- file 3
--- file 4
subdirectory 2
--- file 5
--- file 6
수정 된 코드 :
function Zip($source, $destination, $include_dir = false)
{
if (!extension_loaded('zip') || !file_exists($source)) {
return false;
}
if (file_exists($destination)) {
unlink ($destination);
}
$zip = new ZipArchive();
if (!$zip->open($destination, ZIPARCHIVE::CREATE)) {
return false;
}
$source = str_replace('\\', '/', realpath($source));
if (is_dir($source) === true)
{
$files = new RecursiveIteratorIterator(new RecursiveDirectoryIterator($source), RecursiveIteratorIterator::SELF_FIRST);
if ($include_dir) {
$arr = explode("/",$source);
$maindir = $arr[count($arr)- 1];
$source = "";
for ($i=0; $i < count($arr) - 1; $i++) {
$source .= '/' . $arr[$i];
}
$source = substr($source, 1);
$zip->addEmptyDir($maindir);
}
foreach ($files as $file)
{
$file = str_replace('\\', '/', $file);
// Ignore "." and ".." folders
if( in_array(substr($file, strrpos($file, '/')+1), array('.', '..')) )
continue;
$file = realpath($file);
if (is_dir($file) === true)
{
$zip->addEmptyDir(str_replace($source . '/', '', $file . '/'));
}
else if (is_file($file) === true)
{
$zip->addFromString(str_replace($source . '/', '', $file), file_get_contents($file));
}
}
}
else if (is_file($source) === true)
{
$zip->addFromString(basename($source), file_get_contents($source));
}
return $zip->close();
}
답변
사용법 : thisfile.php? dir =. / path / to / folder (압축 후 다운로드 도 시작됩니다 🙂
<?php
$exclude_some_files=
array(
'mainfolder/folder1/filename.php',
'mainfolder/folder5/otherfile.php'
);
//***************built from https://gist.github.com/ninadsp/6098467 ******
class ModifiedFlxZipArchive extends ZipArchive {
public function addDirDoo($location, $name , $prohib_filenames=false) {
if (!file_exists($location)) { die("maybe file/folder path incorrect");}
$this->addEmptyDir($name);
$name .= '/';
$location.= '/';
$dir = opendir ($location); // Read all Files in Dir
while ($file = readdir($dir)){
if ($file == '.' || $file == '..') continue;
if (!in_array($name.$file,$prohib_filenames)){
if (filetype( $location . $file) == 'dir'){
$this->addDirDoo($location . $file, $name . $file,$prohib_filenames );
}
else {
$this->addFile($location . $file, $name . $file);
}
}
}
}
public function downld($zip_name){
ob_get_clean();
header("Pragma: public"); header("Expires: 0"); header("Cache-Control: must-revalidate, post-check=0, pre-check=0");
header("Cache-Control: private", false); header("Content-Type: application/zip");
header("Content-Disposition: attachment; filename=" . basename($zip_name) . ";" );
header("Content-Transfer-Encoding: binary");
header("Content-Length: " . filesize($zip_name));
readfile($zip_name);
}
}
//set memory limits
set_time_limit(3000);
ini_set('max_execution_time', 3000);
ini_set('memory_limit','100M');
$new_zip_filename='down_zip_file_'.rand(1,1000000).'.zip';
// Download action
if (isset($_GET['dir'])) {
$za = new ModifiedFlxZipArchive;
//create an archive
if ($za->open($new_zip_filename, ZipArchive::CREATE)) {
$za->addDirDoo($_GET['dir'], basename($_GET['dir']), $exclude_some_files); $za->close();
}else {die('cantttt');}
if (isset($_GET['dir'])) {
$za = new ModifiedFlxZipArchive;
//create an archive
if ($za->open($new_zip_filename, ZipArchive::CREATE)) {
$za->addDirDoo($_GET['dir'], basename($_GET['dir']), $exclude_some_files); $za->close();
}else {die('cantttt');}
//download archive
//on the same execution,this made problems in some hostings, so better redirect
//$za -> downld($new_zip_filename);
header("location:?fildown=".$new_zip_filename); exit;
}
if (isset($_GET['fildown'])){
$za = new ModifiedFlxZipArchive;
$za -> downld($_GET['fildown']);
}
?>
답변
이 링크 시도 <-여기에 소스 코드 추가
/** Include the Pear Library for Zip */
include ('Archive/Zip.php');
/** Create a Zipping Object...
* Name of zip file to be created..
* You can specify the path too */
$obj = new Archive_Zip('test.zip');
/**
* create a file array of Files to be Added in Zip
*/
$files = array('black.gif',
'blue.gif',
);
/**
* creating zip file..if success do something else do something...
* if Error in file creation ..it is either due to permission problem (Solution: give 777 to that folder)
* Or Corruption of File Problem..
*/
if ($obj->create($files)) {
// echo 'Created successfully!';
} else {
//echo 'Error in file creation';
}
?>; // We'll be outputting a ZIP
header('Content-type: application/zip');
// It will be called test.zip
header('Content-Disposition: attachment; filename="test.zip"');
//read a file and send
readfile('test.zip');
?>;
답변
여기에 내 코드가 있습니다 .Zip 폴더 및 하위 폴더 및 파일을 zip 형식으로 다운로드 가능하게 만듭니다.
function zip()
{
$source='path/folder'// Path To the folder;
$destination='path/folder/abc.zip'// Path to the file and file name ;
$include_dir = false;
$archive = 'abc.zip'// File Name ;
if (!extension_loaded('zip') || !file_exists($source)) {
return false;
}
if (file_exists($destination)) {
unlink ($destination);
}
$zip = new ZipArchive;
if (!$zip->open($archive, ZipArchive::CREATE)) {
return false;
}
$source = str_replace('\\', '/', realpath($source));
if (is_dir($source) === true)
{
$files = new RecursiveIteratorIterator(new RecursiveDirectoryIterator($source), RecursiveIteratorIterator::SELF_FIRST);
if ($include_dir) {
$arr = explode("/",$source);
$maindir = $arr[count($arr)- 1];
$source = "";
for ($i=0; $i < count($arr) - 1; $i++) {
$source .= '/' . $arr[$i];
}
$source = substr($source, 1);
$zip->addEmptyDir($maindir);
}
foreach ($files as $file)
{
$file = str_replace('\\', '/', $file);
// Ignore "." and ".." folders
if( in_array(substr($file, strrpos($file, '/')+1), array('.', '..')) )
continue;
$file = realpath($file);
if (is_dir($file) === true)
{
$zip->addEmptyDir(str_replace($source . '/', '', $file . '/'));
}
else if (is_file($file) === true)
{
$zip->addFromString(str_replace($source . '/', '', $file), file_get_contents($file));
}
}
}
else if (is_file($source) === true)
{
$zip->addFromString(basename($source), file_get_contents($source));
}
$zip->close();
header('Content-Type: application/zip');
header('Content-disposition: attachment; filename='.$archive);
header('Content-Length: '.filesize($archive));
readfile($archive);
unlink($archive);
}
코드에 문제가 있으면 알려주십시오.
답변
Mac OSX에서이 Zip 기능을 실행해야했습니다.
그래서 나는 항상 성가신 .DS_Store를 압축합니다.
추가 무시 파일을 포함하여 https://stackoverflow.com/users/2019515/user2019515 를 수정 했습니다.
function zipIt($source, $destination, $include_dir = false, $additionalIgnoreFiles = array())
{
// Ignore "." and ".." folders by default
$defaultIgnoreFiles = array('.', '..');
// include more files to ignore
$ignoreFiles = array_merge($defaultIgnoreFiles, $additionalIgnoreFiles);
if (!extension_loaded('zip') || !file_exists($source)) {
return false;
}
if (file_exists($destination)) {
unlink ($destination);
}
$zip = new ZipArchive();
if (!$zip->open($destination, ZIPARCHIVE::CREATE)) {
return false;
}
$source = str_replace('\\', '/', realpath($source));
if (is_dir($source) === true)
{
$files = new RecursiveIteratorIterator(new RecursiveDirectoryIterator($source), RecursiveIteratorIterator::SELF_FIRST);
if ($include_dir) {
$arr = explode("/",$source);
$maindir = $arr[count($arr)- 1];
$source = "";
for ($i=0; $i < count($arr) - 1; $i++) {
$source .= '/' . $arr[$i];
}
$source = substr($source, 1);
$zip->addEmptyDir($maindir);
}
foreach ($files as $file)
{
$file = str_replace('\\', '/', $file);
// purposely ignore files that are irrelevant
if( in_array(substr($file, strrpos($file, '/')+1), $ignoreFiles) )
continue;
$file = realpath($file);
if (is_dir($file) === true)
{
$zip->addEmptyDir(str_replace($source . '/', '', $file . '/'));
}
else if (is_file($file) === true)
{
$zip->addFromString(str_replace($source . '/', '', $file), file_get_contents($file));
}
}
}
else if (is_file($source) === true)
{
$zip->addFromString(basename($source), file_get_contents($source));
}
return $zip->close();
}
따라서 zip에서 .DS_Store를 무시하려면 다음을 실행하십시오.
zipIt ( ‘/ path / to / folder’, ‘/path/to/compressed.zip’, false, array ( ‘. DS_Store’));
